3/8" 37 Degree JIC Adapter for TRS21 Recovery Pump - Pair 1.5inch Cloudy or dark oil should

Cloudy or dark oil should be changed

TruFit® components are cleaned in accordance with SSP documented work instructions using equipment calibrated to NIST standards with environmentally-safe and stable agents

Unique Catch Port Design: An additional length of hose can be installed at the port inside the tank to facilitate accurate collection of resin

Compressor Seals will require re-build after 200-240hrs of operation

570" Bead Center 6

3/8" 37 Degree JIC Adapter for TRS21 Recovery Pump - Pair 1.5inch Cloudy or dark oil shouldIncludes a Pair of Custom 3 8" 37 degree JIC fittings that adapt on to any TRS21 pump. (Does not include Pump) ***Note: This Adapter SHOULD NOT BE OVERTIGHTENED. Hand Tight with 1 4 Wrench turn will complete the face seal of the O ring. (PTFE Thread Tape is NOT Required for this connection) ***Note: Always use 2 Wrenches while tightening the hose to the flare to stop the gasket from being crushed.